Reactive Power Factor Control Panel
Features;
√ Easy to use with Turkish language menu √ Advanced speaker software √ Easy commissioning √ Large color LCD display (320 x 240 pixels 2.4”) √ Number of steps required (15 steps) √ Fast and accurate capacitor power study √ Normal or fast mode selection √ Ability to connect three-phase, diaphase and single-phase capacitors √ Ability to connect shunt reactors to 13,14,15 steps √ Display of currents and voltages up to the 31st harmonic simultaneously with graphs √ Total current and voltage harmonics √ Phase or the phases to which the capacitors are connected are displayed on the screen Color display √ Ability to compensate even at low currents (min. 10 mA) √ 40 ms measurement-calculation and response time √ Multiple orientation screen displays
Warnings;
1- The device must be commissioned and programmed by authorized and qualified persons. If necessary, inspections should be carried out by these persons. 2- Since the compensation is a complex system, it is recommended that the subscribers maintain the system under the control of qualified, specialist electrical engineers and technicians belonging to the company or having a contract. 3- Do not open the inside of the device and do not allow it to be opened. There are no parts inside the device that can be tampered with by the user or anyone else. 4- Before making electrical connections to the terminals of the device, make sure that there is no power in the cables and terminals. The panel should not have power. 5- Do not use the device for purposes other than the compensation system. 6- Fasten the device firmly to the panel with the tools on it so that it does not swing. 7- Do not touch the buttons on the front panel of the device with anything other than your finger. 8- After making sure the power is off, wipe your device with a dry cloth only. Water or chemicals used during cleaning will damage the device. 9- Before turning on your device (before powering up), connect the terminals according to the connection scheme and do not cause contact problems (loose connection or many copper wires touching each other, etc.). 10- In your compensation system, use compensation contactors according to the capacity of the capacitors. Select the fuses on the capacitor power line according to the capacitor currents. 11- Choose (out of six) the current value of the fuses to be connected to the terminals C1, C2 and C3, which are the input of the contact phase, taking into account the total current drawn by the coils of the contactors in each group. When contactors with high coil currents are used, an auxiliary relay must be used to prevent damage to the device's contact outputs. 12- The above precautions and warnings are for your safety, if not followed, KAEL Elektronik Ltd. Ltd. or sellers are not responsible.
REAKTI-1187
16 other products in the same category:
Comments (0)
No customer reviews for the moment.
Features;
√ Easy to use with Turkish language menu √ Advanced speaker software √ Easy commissioning √ Large color LCD display (320 x 240 pixels 2.4”) √ Number of steps required (15 steps) √ Fast and accurate capacitor power study √ Normal or fast mode selection √ Ability to connect three-phase, diaphase and single-phase capacitors √ Ability to connect shunt reactors to 13,14,15 steps √ Display of currents and voltages up to the 31st harmonic simultaneously with graphs √ Total current and voltage harmonics √ Phase or the phases to which the capacitors are connected are displayed on the screen Color display √ Ability to compensate even at low currents (min. 10 mA) √ 40 ms measurement-calculation and response time √ Multiple orientation screen displays