Fully-Automated Cyclic Simple Shear System
AZN0.00
No tax
| Technical Specifications | |
|---|---|
|
Capacity |
Up to 10 kN (2,000 lbs.) |
|
Vertical Force |
Stepper motor with built-in controls for vertical load and displacement |
|
Horizontal Force |
Stepper motor with built-in controls for horizontal load and displacement |
|
Speed Range |
0.00003 to 15 mm per min. (0.000001 to 0.6 in per minute |
|
Frequency Range |
Up to 1 Hz. |
|
Vertical Travel |
25.45 mm (1.00 in.) resolved to 0.0013 mm (0.00005 inches) |
|
Horizontal Travel |
±12.5 mm (±0.50 in.) resolved to 0.0013 mm (0.00005 inches) |
|
Power |
Single Phase 208 VAC/60Hz (US) / 220 VAC/50Hz (international) |
 |
|---|
Send us a message|
|
Call us |
|
Accessories |
Geo-NET-PC Network/Communication card to link ShearTrac II-DSS to PC. Teflon- coated stacked rings, and stainless steel trimming ring |
|---|---|
|
Software Module |
Cyclic DSS Software package to automatically run and edit cyclic and static direct simple shear test |
|
Options |
Direct/Residual Shear, Incremental Consolidation, and CRC options available upon request |
|
Dimensions |
228 mm x 560 mm x 762 mm (9 in. x 22 in. x 30 in.) |
|---|---|
|
Weight (approx.) |
63 kg (140 lbs.) |
16 other products in the same category:
Comments (0)
No customer reviews for the moment.
| Technical Specifications | |
|---|---|
|
Capacity |
Up to 10 kN (2,000 lbs.) |
|
Vertical Force |
Stepper motor with built-in controls for vertical load and displacement |
|
Horizontal Force |
Stepper motor with built-in controls for horizontal load and displacement |
|
Speed Range |
0.00003 to 15 mm per min. (0.000001 to 0.6 in per minute |
|
Frequency Range |
Up to 1 Hz. |
|
Vertical Travel |
25.45 mm (1.00 in.) resolved to 0.0013 mm (0.00005 inches) |
|
Horizontal Travel |
±12.5 mm (±0.50 in.) resolved to 0.0013 mm (0.00005 inches) |
|
Power |
Single Phase 208 VAC/60Hz (US) / 220 VAC/50Hz (international) |
|
|---|
|
|
Call us |